Filetype
In order to investigate the characteristics of gas-liquid two-phase flows in horizontal mini circular tubes with inner diameters of 3.14 and 6.68 mm, a prism is adopted to improve the light path in the visualization experimental setup. The front and top views of air-water two-phase flow patterns in two tubes are captured synchronously based on the improved method. Three-dimensional gas-liquid inte
In this study, pool boiling heat transfer of de-ionized water was experimentally studied on a scored copper surface at a heat-flux range of 0 - 60 W/cm2. Bubble dynamics in an isolated bubble region were carefully investigated, including bubble departure diameters, bubble departure frequencies, and active nucleation site densities. The bubble dynamics were compared with available models, indicatin
OBJECTIVE: Untreated perinatal HIV-1 infection is often associated with rapid disease progression in children with HIV (CWH), characterized by high viral loads and early mortality. TRIM22 is a host restriction factor, which directly inhibits HIV-1 transcription, and its genotype variation is associated with disease progression in adults. We tested the hypothesis that TRIM22 genotype is associated
A feasible implementation of a novel X-ray detector for highly energetic X-ray photons with a large solid angle coverage, optimal for the detection of Compton X-ray scattered photons, is described. The device consists of a 20 cm-thick sensitive volume filled with xenon at atmospheric pressure. When the Compton-scattered photons interact with the xenon, the released photoelectrons create clouds of
ZnO-water nanofluid in an inner pipe was experimentally investigated to improve the thermal efficiency of double-pipe heat exchangers. In this work, a 57.6% increase in the Nusselt number was obtained at Re = 14,340 when the ZnO-water nanofluid flowed through a helically corrugated tube. It was found that helical corrugation played a more important role in heat transfer enhancement than thermophys
Attempts for higher output power and thermal efficiency of gas turbines make the inlet temperature of turbine to be far beyond the material melting temperature. Therefore, to protect the airfoil in gas turbine from hot gas and eventually prolong the lifetime of the blade, internal and film cooling structures with better thermal performance and cooling effectiveness are urgently needed. However, th
Liquid–liquid two-phase flow in microchannel is very common in micro-chemical and micro-biological system, etc. Deep understanding of the liquid–liquid two-phase flow mechanisms and mass transfer in microchannel can promote industrial applications significantly. To summarize the recent research progress on the liquid–liquid two-phase flow in microchannel, this paper collects research work about th
Traditional empirical formulas of Colburn heat transfer factors will lead to a design deviation for cryogenic heat exchangers. This paper employs the computational fluid dynamics (CFD) technique to numerically study the thermal performance of cryogenic compact heat exchangers (CCHEs). To obtain more precise convective heat transfer coefficients, the heat transfer performance of CCHE with serrated
Fouling on heat exchanger surfaces can weaken the heat-transfer capability, increase the energy consumption, and even cause the failure of the whole system. In coaxial heat exchangers, spirally corrugated tubes perform better than smooth ones concerning heat transfer and antifouling. In this article, a parametric study on the antifouling performance of a six-start spirally corrugated tube is carri
Heat transfer characteristics in a latticework duct with various sidewalls are numerically investigated. The crossing angle is 90 deg and the number of subchannels is eleven on both the pressure side and suction side for each latticework duct. The thickness of the ribs is 8 mm and the distance between adjacent ribs is 24 mm. The investigation is conducted for various Reynolds numbers (11,000 to 55
A numerical method was used to study the effect of the broken rib locations on the heat transfer and flow structure in the latticework duct with various rotational numbers. The latticework duct had eleven subchannels on both the pressure side and the suction side. The crossing angle for each subchannel was 45 deg. The numerical studies were conducted with five different broken rib locations and si
Sb-based semiconductors are critical p-channel materials for III-V complementary metal oxide semiconductor (CMOS) technology, while the performance of Sb-based metal-oxide-semiconductor field-effect transistors (MOSFETs) is typically inhibited by the low quality of the channel to gate dielectric interface, which leads to poor gate modulation. In this study, we achieve improved electrostatics of ve
Subjective sleep reports are widely used research tools in epidemiology. Whether sleep reports can differ between seasons is less clear. Using multivariable binary or multinomial logistic regression analyses, in the present Swedish cross-sectional two-centre cohort study (N = 19,254; mean age 61 years), we found that participants surveyed during the summer (June–August) were more likely to report
A 180-deg turning channel can be seen in many heat exchange systems, and a strong three-dimensional flow phenomenon will occur at the turning point. In order to strengthen the heat transfer inside the turn and considering the lack of relevant enhanced endwall heat transfer approach, the present study innovatively demonstrates the measures of enhanced internal endwall heat transfer using arrays of
Study Objectives: Individuals with evening chronotype have a higher risk of cardiovascular and metabolic disorders, although the underlying mechanisms are not well understood. In a population-based cohort, we aimed to investigate the association between chronotype and 242 circulating proteins from three panels of established or candidate biomarkers of cardiometabolic processes. Methods: In 2,471 p
The oxidation and reduction of an Ir(100) surface using 2.5, 5, and 10 mbar O2partial pressure and a sample temperature of 775 K have been studied by using high-energy surface X-ray diffraction (HESXRD) which allowed to record large volumes of reciprocal space in short time periods. The complex 3D diffraction patterns could be disentangled in a stepwise procedure. For the 2.5 mbar experiment the m
This work aims to analyze thermal performance for an electric heater filled with different nanofluids, including SiO2-water nanofluid, Fe3O4-water nanofluid, and Cu-water nanofluid. The effect of nanoparticle concentration (0.1–2.0 wt%) is also discussed. Results indicate that Cu-water nanofluids show better heat transfer performance than the other nanofluids. The highest heating efficiency for th
Atomic layer deposition (ALD) is an outstanding deposition technique to deposit highly conformal and uniform thin films with atomic precision. In particular, ALD of transition metal oxide layers from metal amido complexes and water finds its way in several technological fields, including green energy devices and in the semiconductor industry. These ALD reactions are believed to follow a reaction s
X-ray free-electron lasers (XFELs) provide high-brilliance pulses, which offer unique opportunities for coherent X-ray imaging techniques, such as in-line holography. One of the fundamental steps to process in-line holographic data is flat-field correction, which mitigates imaging artifacts and, in turn, enables phase reconstructions. However, conventional flat-field correction approaches cannot c
